Warmup Underfloor Heating

Warmup Underfloor Heating

  • Warmup driveway snow melting cables keep driveways & walkways snow-free and ice-protected. The electric cables are the most flexible, and best for smaller areas, stairs, very long tire tracks or irregular shaped and curved areas for new installations of concrete. While they can be used under pavers or asphalt, they need to be attached to the surface or a mesh which is more time consuming than using snow melting mats. Snow melting cables prevent the accumulation of ice and snow and are hard-wired to a moisture and temperature sensing control for automated activation. Heating stairs, walkways and driveways is made simple and safe with Warmup. The heat output is variable with the cables; closer spacing means more heat and details are in the chart below. Choose your spacing, then secure the cables in place, run the 16 Ft power leads to the junction box(es), and connect to the controller/power. 3” spacing is 50 Watts per Sq Ft and you need 0.20 amps per Sq Ft; each 200 Sq Ft is a load of 40 Amps requiring a 50 A breaker at 240V. If you have limited power available or a budget restriction, you have options; increase spacing to 4” to cover more area at the lower 36 W/SF, or heat a path down the middle of a walkway or tire tracks on a driveway to economize. We are always available to help design the ideal system for you. We do not recommend using 5” spacing for all but the most mild climates since 30 W/SF may not meet your expectations. We have solutions for residential & commercial projects of all sizes and types using 240V cables, plus 208 & 277 V are supported by de-rating or up-rating, i.e. a 240v cable operated at 208V provides 25% less heat output. Warmup mats have more voltage and size options and can be combined with cables. The ideal Warmup electric heated driveway system is designed operate automatically. As it monitors moisture, temperature, and precipitation, the controller will turn the system on to heat the surface just above freezing. We offer simple sensor-controllers for small systems as well as the Warmup Wi-Fi WSM-252W which is activated by the weather forecast to preheat the slab before the snowfall.

    Warmup Underfloor Heating

    Warmup Snow Melting Cable 480V, Choose Option:

    Warmup driveway snow melting cables keep driveways & walkways snow-free and ice-protected. The electric cables are the most flexible, and best for smaller areas, stairs, very long tire tracks or...

    $293.20 - $1,195.05
    Choose Options
  • Warmup driveway snow melting cables keep driveways & walkways snow-free and ice-protected. The electric cables are the most flexible, and best for smaller areas, stairs, very long tire tracks or irregular shaped and curved areas for new installations of concrete. While they can be used under pavers or asphalt, they need to be attached to the surface or a mesh which is more time consuming than using snow melting mats. Snow melting cables prevent the accumulation of ice and snow and are hard-wired to a moisture and temperature sensing control for automated activation. Heating stairs, walkways and driveways is made simple and safe with Warmup. The heat output is variable with the cables; closer spacing means more heat and details are in the chart below. Choose your spacing, then secure the cables in place, run the 16 Ft power leads to the junction box(es), and connect to the controller/power. 3” spacing is 50 Watts per Sq Ft and you need 0.20 amps per Sq Ft; each 200 Sq Ft is a load of 40 Amps requiring a 50 A breaker at 240V. If you have limited power available or a budget restriction, you have options; increase spacing to 4” to cover more area at the lower 36 W/SF, or heat a path down the middle of a walkway or tire tracks on a driveway to economize. We are always available to help design the ideal system for you. We do not recommend using 5” spacing for all but the most mild climates since 30 W/SF may not meet your expectations. We have solutions for residential & commercial projects of all sizes and types using 240V cables, plus 208 & 277 V are supported by de-rating or up-rating, i.e. a 240v cable operated at 208V provides 25% less heat output. Warmup mats have more voltage and size options and can be combined with cables. The ideal Warmup electric heated driveway system is designed operate automatically. As it monitors moisture, temperature, and precipitation, the controller will turn the system on to heat the surface just above freezing. We offer simple sensor-controllers for small systems as well as the Warmup Wi-Fi WSM-252W which is activated by the weather forecast to preheat the slab before the snowfall.

    Warmup Underfloor Heating

    Warmup Snow Melting Cable 240V, Choose Option:

    Warmup driveway snow melting cables keep driveways & walkways snow-free and ice-protected. The electric cables are the most flexible, and best for smaller areas, stairs, very long tire tracks or...

    $259.12 - $1,045.05
    Choose Options
  • Warmup driveway snow melting mats keep driveways & walkways snow-free and ice-protected. The electric mats roll out quickly under new installations of concrete, asphalt or pavers to prevent the accumulation of ice and snow and are hard-wired to a moisture and temperature sensing control for automated activation. Heating stairs, walkways and driveways is made simple and safe with Warmup. Mats are the best choice for straight runs, walkways and tire-tracks since the wire is pre-spaced and attached to a mesh in 2 Ft and 3 Ft widths for fastest installation. Secure the mats in place, run the 16 Ft power leads to the junction box(es), and connect to the controller/power. At 50 Watts per Sq Ft, you need 0.20 amps per Sq Ft; each 200 Sq Ft is a load of 40 Amps requiring a 50 A breaker at 240V. If you have limited power available or a budget restriction, you have options; heat a path down the middle of a walkway or tire tracks on a driveway to economize. We are always available to help design the ideal system for you. We have solutions for residential & commercial projects of all sizes and types in voltages 240 & 480, plus 208 & 277 V are supported by using 240V mats and de-rating or up-rating. i.e. a 240v mat (50 W/SF) operated at 208V provides 38 W/SF which is enough power in most climates. There are also 3-phase wiring possibilities. The ideal Warmup electric heated driveway system is designed operate automatically. As it monitors moisture, temperature, and precipitation, the controller will turn the system on to heat the surface just above freezing. We offer simple sensor-controllers for small systems as well as the Warmup Wi-Fi WSM-252W which is activated by the weather forecast to preheat the slab before the snowfall.

    Warmup Underfloor Heating

    Warmup Snow Melting Mat 240v: Choose Option!

    Warmup driveway snow melting mats keep driveways & walkways snow-free and ice-protected. The electric mats roll out quickly under new installations of concrete, asphalt or pavers to prevent the...

    $261.45 - $1,310.42
    Choose Options
  • Warmup driveway snow melting mats keep driveways & walkways snow-free and ice-protected. The electric mats roll out quickly under new installations of concrete, asphalt or pavers to prevent the accumulation of ice and snow and are hard-wired to a moisture and temperature sensing control for automated activation. Heating stairs, walkways and driveways is made simple and safe with Warmup. Mats are the best choice for straight runs, walkways and tire-tracks since the wire is pre-spaced and attached to a mesh in 2 Ft and 3 Ft widths for fastest installation. Secure the mats in place, run the 16 Ft power leads to the junction box(es), and connect to the controller/power. At 50 Watts per Sq Ft, you need 0.20 amps per Sq Ft; each 200 Sq Ft is a load of 40 Amps requiring a 50 A breaker at 240V. If you have limited power available or a budget restriction, you have options; heat a path down the middle of a walkway or tire tracks on a driveway to economize. We are always available to help design the ideal system for you. We have solutions for residential & commercial projects of all sizes and types in voltages 240 & 480, plus 208 & 277 V are supported by using 240V mats and de-rating or up-rating. i.e. a 240v mat (50 W/SF) operated at 208V provides 38 W/SF which is enough power in most climates. There are also 3-phase wiring possibilities. The ideal Warmup electric heated driveway system is designed operate automatically. As it monitors moisture, temperature, and precipitation, the controller will turn the system on to heat the surface just above freezing. We offer simple sensor-controllers for small systems as well as the Warmup Wi-Fi WSM-252W which is activated by the weather forecast to preheat the slab before the snowfall.

    Warmup Underfloor Heating

    Warmup Snow Melting Mat 480v: Choose Option!

    Warmup driveway snow melting mats keep driveways & walkways snow-free and ice-protected. The electric mats roll out quickly under new installations of concrete, asphalt or pavers to prevent the...

    $477.00 - $1,369.52
    Choose Options
  • The Warmup StickyMat installs fast and easy to heat any room and lays flat for a smooth flooring install on top. The mats roll out quickly, reducing installation time by 35%, for a truly fast and secure method of electric underfloor heating installation. The ultra-thin ⅛” heating cable is double insulated with an advanced fluoropolymer core and integrated ground making it incredibly durable, safe, and easy to lay flooring over. We provide FREE design assistance and a floor layout map in 1 business day for all Warmup projects to make your project move smoothly. The leading 30 Year warranty plus the exclusive SafetyNet guarantee ensures many years of comfort after installation. Warmup mesh mats provide the most heat of all our mats making them ideal for all floors, especially concrete. Rated at 14 Watts per sq ft and approved by UL for your safety, they also work in most primary heat applications. Available in 2 widths, sizes of 9 - 240 sq ft and 120v and 240v, there is a Warmup mat to fit any room. Once your subfloor is clean and dry, roll the mat out, then make cuts and turns as necessary to fit the mat into your room (cut the mat, never the heating wire). The pressure-sensitive adhesive holds it in place, and then when you are ready, peel the backing off the 2 sided tape to secure it further, making it easy to tile over. Low Energy Use - a 30 sq ft bathroom uses only 420 Watts (3.5 amps @ 120v) High heat output is perfect for floor warming or primary heat 4iE Smart Thermostat is programmable and provides energy savings Dual adhesives securely hold mats when tiling - Sticky mesh plus 2-sided tape Cut-and-turn for fast and easy installation - fits any shape room quickly Low profile 1/8” thickness has a minimal effect on floor height and the open mesh allows mortar through 10’ power lead connects to Thermostat directly (multiple mats OK, they all run to thermostat) 20” and 36” widths and 27 sizes in 2 voltages means there’s a Warmup mat for you

    Warmup Underfloor Heating

    Warmup StickyMat Heats 10 sq ft 20" x 6 Ft 240v

    The Warmup StickyMat installs fast and easy to heat any room and lays flat for a smooth flooring install on top. The mats roll out quickly, reducing installation time by 35%, for a truly fast and...

    MSRP: $240.62
    $216.56
    Add to Cart
  • The Warmup StickyMat installs fast and easy to heat any room and lays flat for a smooth flooring install on top. The mats roll out quickly, reducing installation time by 35%, for a truly fast and secure method of electric underfloor heating installation. The ultra-thin ⅛” heating cable is double insulated with an advanced fluoropolymer core and integrated ground making it incredibly durable, safe, and easy to lay flooring over. We provide FREE design assistance and a floor layout map in 1 business day for all Warmup projects to make your project move smoothly. The leading 30 Year warranty plus the exclusive SafetyNet guarantee ensures many years of comfort after installation. Warmup mesh mats provide the most heat of all our mats making them ideal for all floors, especially concrete. Rated at 14 Watts per sq ft and approved by UL for your safety, they also work in most primary heat applications. Available in 2 widths, sizes of 9 - 240 sq ft and 120v and 240v, there is a Warmup mat to fit any room. Once your subfloor is clean and dry, roll the mat out, then make cuts and turns as necessary to fit the mat into your room (cut the mat, never the heating wire). The pressure-sensitive adhesive holds it in place, and then when you are ready, peel the backing off the 2 sided tape to secure it further, making it easy to tile over. Low Energy Use - a 30 sq ft bathroom uses only 420 Watts (3.5 amps @ 120v) High heat output is perfect for floor warming or primary heat 4iE Smart Thermostat is programmable and provides energy savings Dual adhesives securely hold mats when tiling - Sticky mesh plus 2-sided tape Cut-and-turn for fast and easy installation - fits any shape room quickly Low profile 1/8” thickness has a minimal effect on floor height and the open mesh allows mortar through 10’ power lead connects to Thermostat directly (multiple mats OK, they all run to thermostat) 20” and 36” widths and 27 sizes in 2 voltages means there’s a Warmup mat for you

    Warmup Underfloor Heating

    Warmup StickyMat Heats 120 Sq Ft 20" x 72 Ft 240V

    The Warmup StickyMat installs fast and easy to heat any room and lays flat for a smooth flooring install on top. The mats roll out quickly, reducing installation time by 35%, for a truly fast and...

    MSRP: $1,320.76
    $1,188.68
    Add to Cart

Exclusively Featuring Warmup, The #1 Best Selling Brand in the USA & Worldwide!